3BSE038415R1 | ABB AO810V2 Analog Output Module

The AO810V2 Analog Output Module has 8 unipolar analog output channels. It supervises the communication to the D/A-converters by reading back and verifying the serial data. During the readback, the opencircuit diagnostic is received. The module performs self-diagnostics cyclically, including supervision of process power supply. If the supply voltage to output circuitry is too low, an error is reported as a channel error. The channel diagnostic detects faults in active channels, reporting an error if the output current is less than the output set value (greater than 1 mA).

Features and Benefits:

8 channels of 0…20 mA, 4…20 mA outputs
OSP sets outputs to a predetermined state upon error detection
Analog output is short-circuit secured to ZP or +24 V

General Information:

Article Number: 3BSE038415R1
Type: Analog Output
Signal Specification: 0..20 mA, 4..20 mA
Number of Channels: 8
HART: No
SOE: No
Redundancy: No
High Integrity: No
Intrinsic Safety: No
Mechanics: S800

Detailed Data:

Resolution: 14 bit
Isolation: Groupwise isolated from ground
Under/Over Range: – / +15%
Output Load: ≤ 500 Ω (supply connected to L1+ only), 250 – 850 Ω (with supply connected to L2+ only)
Error: Max. 0.1% at 0 – 500 ohms (current)
Temperature Drift: Typ. 30 ppm/°C, Max. 60 ppm/°C
Rise Time: 0.35 ms (PL = 500 Ω)
Update Cycle Time: ≤ 2ms
Current Limiting: Short circuit proof current-limited output
Maximum Field Cable Length: 600 meters (656 yards)
Rated Insulation Voltage: 50 V
Dielectric Test Voltage: 500 V a.c.
Power Dissipation: 2.3 W
Current Consumption +5 V Modulebus: Max 70 mA
Current Consumption +24 V Modulebus: 0
Current Consumption +24 V External: 245 mA

Diagnostics:

Front LEDs: F (Fault), R (Run), W (Warning), O (OSP)
Supervision:
- Module Error: Output power low
- Channel Error: Open circuit (for current >1 mA)
Status Indication of Supervision: Module Error, Module Warning, Channel Error

Environment and Certification:

CE Mark: Yes
Electrical Safety: EN 61010-1, UL 61010-1, EN 61010-2-201, UL 61010-2-201
Hazardous Location: C1 Div 2 cULus, C1 Zone 2 cULus, ATEX Zone 2
Marine Certification: ABS, BV, DNV, LR
Temperature, Operating: 0 to +55 °C (+32 to +131 °F), approvals issued for +5 to +55 °C
Temperature, Storage: -40 to +70 °C (-40 to +158 °F)
Pollution Degree: Degree 2, IEC 60664-1
Corrosion Protection: ISA-S71.04: G3
Relative Humidity: 5 to 95 %, non-condensing
Max Ambient Temperature: 55 °C (131 °F), for vertical mounting in compact MTU 40 °C (104 °F)
Protection Class: IP20 according to IEC 60529
Mechanical Operating Conditions: IEC/EN 61131-2
EMC: EN 61000-6-4 and EN 61000-6-2
Overvoltage Categories: IEC/EN 60664-1, EN 50178
Equipment Class: Class I according to IEC 61140 (earth protected)
RoHS Compliance: DIRECTIVE/2011/65/EU (EN 50581:2012)
WEEE Compliance: DIRECTIVE/2012/19/EU

Compatibility:

Use with MTU: TU810, TU812, TU814, TU830, TU833
Keying Code: AE

Dimensions:

Width: 45 mm (1.77”)
Depth: 102 mm (4.01”), 111 mm (4.37”) including connector
Height: 119 mm (4.7”)
Weight: 0.18 kg (0.4 lbs.)

Contact Us

Phone: +86-15915488782
Email: uma@meloauto.com
WhatsApp: +8615915488782
Business Hours: 24/7 service
Address: Unit 601, Powerlong International Center, No. 1599 Luling Road, Siming District, Xiamen City, Fujian, China

Let us help you find the automation parts you need with reliable quality and dedicated support!