ALE111-S51 | YOKOGAWA Ethernet Communication Module (for FIO)

General Information

The ALE111 Ethernet Communication Module is used by a Field Control Station (FCS) to enable Ethernet communication with subsystems such as FA-M3. This module can be mounted on various field control units, including AFV30, AFV40, AFV10, AFF50, as well as bus node units like ANB10, ANB11, and ANR10.

Hardware Specifications

• Physical Layer Interface: IEEE 802.3 10BASE-T
• Connection Method: Point-to-point
• Connector: RJ-45
• Transmission Method: Half-duplex
• Transmission Speed: 10 Mbps
• Transmission Route: 100-ohm twisted-pair cable (unshielded)
• Transmission Distance: 100 m (between FCS and subsystems, or HUB and subsystems)
• Installation Method: Mounted on ANB10, ANB11, ANR10, AFF50, AFV10, AFV30, or AFV40 units
• Number of Ports: 1 port
• Media Access Control: CSMA/CD
• Communication Functions: Supports communication with FA-M3, Modbus, MELSEC, YFGW, DARWIN/DAQSTATION, and PLC-5/SLC500
• Current Consumption: 0.5 A
• Weight: 0.3 kg

An FCS uses this module to collect or set data with control calculations via Ethernet communication. Each communication module can establish only one communication function at a time; multiple communication functions are not supported simultaneously.

Operating Environment

Hardware Requirements

The Ethernet communication module operates on the following FCS models:

• AFV Series: AFV30S, AFV30D, AFV40S, AFV40D, AFV10S, AFV10D
• AFS Series: AFS30S, AFS30D, AFS40S, AFS40D
• AFG Series: AFG30S, AFG30D, AFG40S, AFG40D, AFG81S, AFG81D, AFG82S, AFG82D, AFG83S, AFG83D, AFG84S, AFG84D
• AFF50 Series: AFF50S, AFF50D

Software Requirements

The module works with control functions for the following FCS models:

• LFS1700: For AFV30/AFV40, Vnet/IP, and FIO
• LFS1500: For AFV10, Vnet/IP, and FIO
• LFS1300: For AFS30/AFS40, Vnet, and FIO
• LFS1330: For AFG30/AFG40/AFG8, Vnet, and FIO
• LFS1350: For AFF50, Vnet, and FIO

Engineering Requirements

Works with LHS5100/LHMS5100 Standard Builder Function.

Model and Suffix Codes

• Model: ALE111 Ethernet Communication Module
• Suffix Codes:
  • -S: Standard Type
  • 5: With no explosion protection
  • 1: With ISA Standard G3 option

Ordering Information

When ordering, specify the model and suffix codes.
For explosion protection details, refer to TI 33Q01J30-01E.

Trademarks

• CENTUM, DARWIN, and DAQSTATION are registered trademarks of Yokogawa Electric Corporation.
• Ethernet is a registered trademark of XEROX Corporation.
• STARDOM is a trademark of Yokogawa Electric Corporation.
• Modicon and Modbus are registered trademarks of Schneider Electric.
• Memocon is a registered trademark of Yasukawa Electric Co., Ltd.
• SLC, PLC-5, and Allen-Bradley are trademarks or registered trademarks of Rockwell Automation, Inc.
• MELSEC is a registered trademark of Mitsubishi Electric Co., Ltd.
• Other product and company names mentioned are trademarks or registered trademarks of their respective holders.