Specifications
Inputs
- Signal: Accepts from 1 to 4 pressure transducer signals.
- Input Impedance:
- 3-wire transducer: 10 kΩ
- 2-wire transducer: 1.5 MΩ to 3.5 MΩ typical
- Sensitivity:
- Dynamic pressure: 100 mV/psi (1.45 mV/mBar).
Outputs
- Front Panel LEDs:
- OK LED: Indicates when the system is operating properly.
- TX/RX LED: Indicates communication between the I/O module and other modules in the 3500 rack.
- Bypass LED: Indicates when the monitor is in Bypass Mode.
- Buffered Transducer Outputs:
- Coaxial connectors for each channel (one per channel).
- Short-circuit protection for each output.
- Cascade Mode does not cascade the buffered transducer outputs.
- Output Impedance: 550 Ω.
- Transducer Supplies:
- 3-wire: -24 Vdc
- 2-wire: 3.3 mA current source @ 22 Vdc (nominal).
- Recorder Outputs:
- +4 to +20 mA, proportional to the monitor’s full-scale.
- Individual recorder values for each channel.
- Short circuits on recorder outputs do not affect monitor operation.
- Voltage Compliance (Current Output):
- 0 to +12 Vdc range across load, with a load resistance of 0 to 600 Ω.
- Resolution: 0.3662 µA per bit.
- Error: ±0.25% at room temperature, -0.66 to +0.70% over temperature range.
- Update Rate: Approximately 100 ms or less.
Signal Conditioning
- Dynamic Pressure – Direct Filter:
- Low Mode: 5 Hz to 4 kHz (if no low-pass filter is chosen, the range extends to approximately 5.285 kHz).
- High Mode: 10 Hz to 14.75 kHz.
Physical Characteristics
- Dimensions:
- Height: 241.3 mm (9.50 in)
- Width: 24.4 mm (0.96 in)
- Depth: 163.1 mm (6.42 in)
- Weight: 0.46 kg (1.01 lb)
Spares
- 140482-02 I/O Module External Termination
Contact Us
- Phone: +86-15915488782
- Email: [email protected]
- WhatsApp: +8615915488782
- Business Hours: 24/7 service
- Address: Unit 601, Powerlong International Center, No. 1599 Luling Road, Siming District, Xiamen City, Fujian, China
WeChat
Scan the QR Code with wechat