Bently Nevada 330425-01-05 Proximity Transducer System

Description

These accelerometers are specifically designed for critical machinery applications, such as gear mesh monitoring, where casing acceleration measurements are essential. In contrast, the 330425 model provides a higher amplitude range of 75 g peak and a sensitivity of 25 mV/g, making it ideal for applications requiring more extensive measurement ranges.

Specifications

Electrical

• Sensitivity: 2.5 mV/m/s² (25 mV/g) ±5%
• Acceleration Range: 735 m/s² (75 g) peak overall acceleration within the 10 Hz to 15 kHz frequency span. Frequencies above 15 kHz, especially near the transducer’s resonance, significantly reduce this range.
• Amplitude Linearity: ±1% to 735 m/s² (75 g) peak
• Broadband Noise Floor (10 Hz to 15 kHz): 0.098 m/s² (0.01 g) RMS

Both Units

• Frequency Response:
  • 10 Hz to 15 kHz (600 cpm to 900,000 cpm) ±3dB
  • 30 Hz to 10 kHz (1800 cpm to 600,000 cpm) ±10%
• Temperature Sensitivity:
  • -11% to +3% typical across the operating temperature range.
• Transverse Sensitivity: Less than 5% of axial sensitivity.
• Mounted Resonant Frequency: Greater than 30 kHz
• Amplitude of Resonant Peak: 20 dB maximum
• Base Strain Sensitivity:
  • For serial numbers with the letter “G” (including all new sensors): 49 mm/s²/mstrain (0.005 g/mstrain)
  • For serial numbers without the letter “G” (shipped before April 2004):
    • 980 mm/s²/mstrain (0.100 g/mstrain) without Mounting Base (API adapter)
    • 4.9 mm/s²/mstrain (0.0005 g/mstrain) with Mounting Base (API adapter)

  For units without the letter “G,” Bently Nevada recommends using the Mounting Base to minimize base strain sensitivity.

• Maximum Cable Length: 305 meters (1000 feet) with no degradation of signal

Power Requirements

• Input Voltage: -24 ± 0.5 VDC
• Bias Current: 2 mA nominal
• Output Bias Voltage: -8.5 ± 0.5 VDC
• Grounding: Case isolated

Environmental Limits

• Operating and Storage Temperature: -55°C to +121°C (-67°F to +250°F)
• Shock Survivability: 49,050 m/s² (5000 g) peak, maximum
• Relative Humidity: 100% condensing, non-submerged. The case is hermetically sealed.
• Magnetic Field Susceptibility: <2.21 mm/s²/gauss (225 mg/gauss) [50 gauss, 50-60Hz]
• IP Rating: Equivalent to IP68 (Dust tight and watertight). This rating applies only to the sensor, not the cable.

Physical

• Weight (No Cable): 99 g (3.5 oz) typical
• Diameter: 23 mm (0.93 in)
• Height: 59 mm (2.3 in), including mounting stud
• Connector: 3-pin MIL-C-5015 Receptacle, 316L stainless steel
• Mounting Surface: 32 microinch RMS
• Mounting Torque: 4.1 N·m (3.0 ft·lb)
• Case Material: 316L stainless steel
• Weight (No Cable): 100 g (3.5 oz) typical
• Mounting Angle: Any orientation

Ordering Information 330425 Accelerometer

 

• A: Mounting Thread Option
  • 01: ¼-28 UNF integral stud
• B: Agency Approval Option
  • 5: Multiple approvals (CSA, ATEX, IECEx)

 

---

Contact Us

• Phone: +86-15915488782
• Email: uma@meloauto.com
• WhatsApp: +8615915488782
• Business Hours: 24/7 service
• Address: Unit 601, Powerlong International Center, No. 1599 Luling Road, Siming District, Xiamen City, Fujian, China

Let us help you find the automation parts you need with reliable quality and dedicated support!