Bently Nevada 9200-01-01-10-00 Two-Wire Velocity Seismoprobe Transducer

The 9200 Two-Wire Velocity Seismoprobe Transducer is designed for continuous monitoring and periodic measurements, often in conjunction with diagnostic instruments. When ordered with the integral cable option, the 9200 offers excellent resistance to corrosive environments without needing additional protective measures.

Key Specifications

Electrical Sensitivity:
- 20 mV/mm/s (500 mV/in/s), ±5%
- Proper termination and orientation at the calibration angle are crucial for accurate performance.
Frequency Response:
- From the minimum operating frequency (see ordering information) to 1 kHz (60,000 cpm)
- +0, -3dB typical
Dynamic Operating Range:
- 2.54 mm (0.100 in) peak-to-peak maximum displacement
Shock Resistance:
- Withstands 50 g peak maximum acceleration along a non-sensitive axis
Transverse Sensitivity:
- ±10% maximum
Polarity of Output Signal:
- Pin A goes positive with respect to Pin B when the transducer case velocity is directed towards the connector
Leadwire Length:
- Up to 305 meters (1,000 feet) maximum distance between Seismoprobe Velocity Transducer and 3300 or 3500 Monitor. Frequency roll-off may occur at longer lengths.

Environmental Limits

Operating and Storage Temperature:
- -29°C to +121°C (-20°F to +250°F)

Physical Dimensions

Height:
- 102 mm (4 in) typical (depends on connector option)
Diameter:
- 41 mm (1.6 in) typical
Weight:
- 300 grams (10.5 ounces) typical

Ordering Information

Model: 9200-01-01-10-00
Product Type: Two-wire Transducer

The 9200 Two-Wire Velocity Seismoprobe Transducer can be used with the 9513 VDC Velocity-to-Displacement Converter, which is ordered separately.

Ordering Options:
9200-AXX-BXX-CXX-DXX

A: Transducer Mounting Angle/Minimum Operating Frequency Option
- 01: 0 ±2.5, 4.5 Hz (270 cpm)
B: Connector Option
- 01: Top Mount
C: Mounting Base Option
- 10: Circular; M10X1 stud
D: Agency Approval Option
- 00: No approvals required