Emerson Delta V 12P7256X062 KL2001X1-BD1 Ethernet I/O Card

The KL2001X1-BD1 Ethernet Input/Output Card (EIOC) enables seamless data exchange with Ethernet devices in the DeltaV™ system. It supports various communication protocols, including Modbus TCP, EtherNet/IP, IEC 61850 MMS, OPC UA client, and EtherNet/IP Control Tag Integration.

This card allows for real-time monitoring and control of Ethernet devices on the Ethernet Device Network via control modules. Devices like PLCs, Motor Control Centers, drives, and switchgear can be controlled directly through the EIOC, independent of a central controller.

Key Features

• Direct Communication: Connects directly to external Ethernet device networks.
• Protocol Support: Easily integrates with Modbus TCP, EtherNet/IP, IEC61850 MMS, OPC UA client, and EtherNet/IP Control Tag Integration.
• Proven Design: Built with the reliable S-series packaging for enhanced performance and durability.
• Modular and Redundant: Supports easy expansion and redundancy for greater system reliability.
• Compatibility: Can communicate with both M-series and S-series controllers.

Hardware Specifications

Environmental Specifications (all components)

• Operating Temperature: -40 to 70°C (-40 to 158°F)
• Storage Temperature: -40 to 85°C (-40 to 185°F)
• Relative Humidity: 5 to 95%, non-condensing
• Protection Rating: IP 20
• Airborne Contaminants: ISA-S71.04-1985 Class G3
• Conformal Coating: Provided for environmental protection
• Shock Resistance: 10 g ½-sine wave for 11 ms
• Vibration Resistance: 1mm peak-to-peak from 2 to 13.2 Hz; 0.7g from 13.2 to 150 Hz

Note: Operating any electronics at the higher end of its temperature range for extended periods may shorten its expected lifetime. Refer to the Effects of Heat and Airflow Inside an Enclosure white paper for further details.

Carrier Specifications

• Capacity: Supports one (simplex) or two (redundant) EIOC modules
• Input Power: +24 VDC ±10%, maximum 1 A
• Redundant Ethernet Connections: Via replaceable Ethernet Isolation Ports (EIPs)
• Ethernet Type: Copper twisted pair: 10/100BASE-TX with RJ45 connectors, full duplex operation – 100m distance
• Mounting: DIN rail latch for horizontal orientation on T-type rail

EIOC Module Specifications

• Max. EIOCs per System: 60
• Input Power: +24 VDC ±10%, maximum 325 mA for simplex; 575 mA for redundant
• Heat Dissipation (Redundant): 7 Watts maximum for simplex; 13 Watts maximum for redundant
• Fuse Protection: Internal, non-replaceable fuse
• Mounting: One or two slots on the Dual Horizontal Carrier
• Communication: Redundant Ethernet connections to:
  • Ethernet Device Network
  • Area Control Network (ACN)
• ACN Network Addressing: Auto-assigned during commissioning
• Device Network Addressing: Manual (Client only)
• Control Module Limit: 2000 modules
• Max Data Values Sent: 4000 per second
• Max Data Values Received: 500 per second
• Max I/O Network Nodes: 300
• Module Execution Rates: 100ms, 200ms, 500ms, 1s, 2s, 5s, 10s, 30s, 60s

LED Indicators:

• Green (Power): Indicates DC power is applied
• Red (Error): Indicates an error condition
• Green (Active/Standby): Indicates operating mode of each EIOC
• Yellow Flashing (Pri./Sec. CN): Indicates valid control network communication

Note: The combined number of remote I/O nodes, CHARM I/O cards (CIOCs), Wireless I/O cards (WIOCs), and Ethernet I/O Cards (EIOCs) in a DeltaV™ system is limited.

Certifications

The EIOC meets several international standards for quality, safety, and performance. Specific certifications include:

• CE – EMC, EN 61326-1
• FM – FM 3600, FM 3611
• CSA – CSA C22.2 No. 213-M1987, CSA C22.2 No. 1010-1
• ATEX – ATEX 94/9/EC, EN60079-0, EN60079-15
• IEC-Ex – IEC60079-0, IEC60079-15
• Marine Certifications:
  • IACS E10
  • ABS Certificate of Design Assessment
  • DNV-GL Marine Certificate
• Security Certifications:
  • Achilles Level 2 (v13.3.1, v14.FP1)

Hazardous Area/Location Certifications

The EIOC is approved for use in hazardous environments according to the following standards:

• FM (USA): Class I, Division 2, Groups A, B, C, D, T4
• cFM (Canada): Class I, Division 2, Groups A, B, C, D, T4
• ATEX: II 3G Ex nA IIC T4 Gc
• IEC Ex: II 3G Ex nA IIC T4 Gc

Spare Part Ordering Information

• Model Number: KL2001X1-BD1
• Order Number: 12P7256X062
• Description: Ethernet I/O Card

---

About Us

  Meloauto – Your Trusted Supplier for Original, Brand-New PLC and DCS Parts Meloauto offer a vast selection of products from globally recognized brands, including Allen Bradley, Bently Nevada, Honeywell, ABB, GE Fanuc, Siemens, Invensys Triconex, ICS Triplex, Foxboro, Yokogawa, Schneider, and Hima, among others. With tens of thousands of new parts ready to ship, Meloauto has successfully served customers across over 50 countries worldwide. We focus on supplying discontinued and hard-to-find items, ensuring each product is in brand-new, original condition.

Contact Us

• Phone: +86-15915488782
• Email: [email protected]
• WhatsApp: +8615915488782
• Business Hours: 24/7 service
• Address: Unit 601, Powerlong International Center, No. 1599 Luling Road, Siming District, Xiamen City, Fujian, China

Let us help you find the automation parts you need with reliable quality and dedicated support!