MX213 | Bachmann MX200 Processor Module

The MX213 is a high-performance industrial processor module from Bachmann that is part of the MX200 series. This module is designed to meet the rigorous requirements of control and automation applications in a wide range of industries, offering both advanced processing capabilities and robust connectivity options.

Processor Specifications:

• Architecture: x86 / AMD LX
• CPU: Industrial Low Voltage
• Clock Frequency: 266 MHz
• Processor Cores: 1 (Single Core)
• Multitasking: Yes
• Hyper-Threading: No
• Real-time SMP / Core Reservation: Not supported

Memory:

• Main Memory / Partitions: 256 MB (supports partitioning)
• RAMDisk: Yes
• Retentive Memory (Retain): 512 kB NVRAM
• Mass Storage Integrated: 64 MB (Flash memory)
• Removable Storage:
  • Compact Flash (via side cover)
  • PC-Card (16/32/64 MB via front side)

Interfaces:

• I/O Subsystem: Bachmann M1 Backplane Interface
  • Supports Cyclic process images and on-event single channel access
  • Synchronization pulse for I/O and field buses
• Ethernet:
  • 2x 10/100 Base-Tx (RJ45)
  • AutoNegotiation and AutoCrossing
• Serial Ports / COM:
  • 1x RS232 (D-SUB-9 m)
  • 1x RS232/RS422/RS485 (D-SUB-9 m)
• USB: 1x USB 2.0 (Type-A female)
• CAN Interface:
  • 1x CAN / CANopen / J1939 (D-SUB-9 m), isolated
  • Data rate: up to 1 Mbit/s
  • Operating Modes: CAN Master, CAN IO Device

Indications & Operation:

• Status Indications:
  • 3x LEDs for CPU status (RUN, INIT, ERR)
  • 2x LEDs for status and link speed per Ethernet port
• Operating Elements:
  • 2x 16-position rotary switches (Hex-switch) for operation mode, programming, boot mode, address setting, etc.

Programming:

• Generic Build Target: Yes, across all model families
• Supported Programming Languages:
  • IEC 61131-3 (Standard PLC programming)
  • C/C++, MATLAB®/Simulink® (for more complex algorithms and simulations)
• Functional Modules: Yes
  • Includes motion control, camming, CNC, adaptive temperature control, etc.

Monitoring:

• Processor Monitoring:
  • Processor temperature
  • Processor load
  • Runtime behavior (including cycle monitoring and watchdog)
• Network Monitoring:
  • Network load monitoring
• Memory Protection: Yes, per partition
• Supply Voltage Monitoring: Yes, with interrupt signal on failure

Subsystems:

• Real-Time Clock:
  • Rechargeable battery-buffered RTC for time and date
  • Synchronization via IEEE 1588 or SNTP (Simple Network Time Protocol)

Energy Supply:

• Supply Voltage: 24 VDC (18 to 34 V)
• Connector Terminal: KZ 51/03 RM 5.08; 3-pol
• Polarity Reversal Protection: Yes
• Isolation of Supply: Yes
• Voltage Interruptions Immunity (IEC 61131-2): PS2
• Rated Power Consumption:
  • Without I/O: 9.5 W
  • With I/O: 33.6 W
• Rated Power Output for I/O: 16.75 W
• Maximum Currents for I/O:
  • +5 V: 2800 mA
  • +15 V: 250 mA
  • -15 V: 200 mA

Electrical Safety:

• Protection Class: III (DIN EN 61140)
• Protection Type: IP20 (IEC 60529)

Environmental Conditions:

• Operating Temperature: -30 to +60 °C (fanless)
• Relative Air Humidity (Operation): 5 to 95% (non-condensing)
• Storage Temperature: -40 to +85 °C
• Relative Air Humidity (Storage): 5 to 95% (non-condensing)
• Maximum Operating Altitude: 2000 m (with derating up to 4500 m)
• Pollution Degree: 2 (non-condensing)

Approvals/Certificates:

• Product Safety: CE, cULus, CCC
• Maritime Approvals: DNV, LR, ABS, BV, NK, KR, RINA

Dimensions & Weight:

• Number of Slots / Module Units: 2
• Dimensions (W x H x D): 110 x 119 x 61 mm
• Weight: Approx. 675 g

System Requirements:

• Backplane: BS2xx, BS2xx/S, BS2xx/E
• Software: Minimum version MxCCore V3.80 (M-Base V3.80); recommended version MxCCore V4.30

Order Codes:

• Item: MX213
• Item No.: 00031491-00
• Description: CPU module MX213 (266 MHz, SingleCore, 256 MB DRAM, 512 kB nvRAM, 64 MB File-Flash, 2x Ethernet 100Base-T, 1x CAN, 1x RS232, 1x USB2.0, I/O supply 17W, Compact Flash slot)

---

Contact Us

• Phone: +86-15915488782
• Email: uma@meloauto.com
• WhatsApp: +8615915488782
• Business Hours: 24/7 service
• Address: Unit 601, Powerlong International Center, No. 1599 Luling Road, Siming District, Xiamen City, Fujian, China

Let us help you find the automation parts you need with reliable quality and dedicated support!