PEPPERL+FUCHS Voltage Repeater KFD2-VR4-Ex1.26

The PEPPERL+FUCHS KFD2-VR4-Ex1.26 is an isolated barrier designed for intrinsic safety applications. It facilitates the safe transmission of vibration sensor signals from hazardous areas to a control system in safe areas. This device provides either a voltage or current supply to vibration sensors such as those from Bently Nevada or other accelerometers.

Functionality and Output

Power Supply for Vibration Sensors: The device delivers a specific current or voltage depending on the type of sensor:
- For 2-wire sensors: It provides supply currents of 3.6 mA, 5.3 mA, or 8.9 mA.
- For 3-wire sensors: It supplies 18 V at 20 mA.

This ensures that both 2-wire and 3-wire vibration sensors receive the necessary power and signal transmission.

Technical Specifications

General Specifications

Signal Type: Analog input.
Safety Integrity Level (SIL): SIL 2, meeting functional safety standards.
Rated Voltage: 19 to 30 V DC.
Power Consumption: Max 1.6 W.
Power Dissipation: Max 1.2 W.

Input and Output

Input Connections:
- Common terminal (4) and individual terminals for signal and supply (terminals 1, 2, 3, 5, and 6).
- Input resistance: 10 kΩ (terminals 4, 6-/2-).
- Output current:
  - > 10 mA at -21 V or > 20 mA at -18 V (terminals 4 and 5).
  - 5.3 mA ±0.4 mA at -10 V (terminal 4 and 1).
  - 3.6 mA ±0.7 mA at -10 V, 20°C (terminal 4 and 3).
Transmission Range: -20 … 0 V.
Output Connections:
- Control side connections: Terminals 7- (signal negative), 8+ (signal positive).
- Output Resistance: 24 Ω typical, 27 Ω maximum.
- Load: Minimum 9 kΩ for 3-wire sensors, 2 kΩ for 2-wire sensors.

Transfer Characteristics

Cut-off Frequency:
- 10 kHz (-0.1 dB)
- 20 kHz (-1 dB)
DC Transfer Error: Less than 10 mV (with a 10 kΩ load).
AC Error: ±5 mV at 20°C (68°F) for alternating components (square or sine waves), within specified input ranges.
Temperature Influence: Less than 100 ppm of span per K.
Time Delay: 7.1 ±0.3 µs.

Ripple

200 kHz bandwidth: < 20 mVrms.
20 kHz bandwidth: < 3 mVrms.

Galvanic Isolation

Output/Power Supply Isolation: Functional insulation with a rated insulation voltage of 50 V AC.
Safe Galvanic Isolation: Voltage peak value of 375 V according to IEC 60079-11.

Certifications and Compliance

EU-type Examination Certificate: BAS 02 ATEX 7206.
Marking:
- Ex ia Ga IIC (gas)
- Ex ia Da IIIC (dust)
- Maximum Safe Voltage: 253 V.
IECEx Approval: IECEx BAS 05.0078, IECEx BAS 10.0085X.
EMC Compliance: EN 61326-1:2013, EN 61326-3-2:2018.
Environmental Compliance:
- EMC: NE 21:2017, EN IEC 61326-3-2:2018.
- Protection against electrical shock: UL 61010-1.
Degree of Protection: IP20, suitable for industrial locations.
Ambient Temperature: -20°C to 60°C (-4°F to 140°F).

Mechanical Specifications

Dimensions:
- Width: 20 mm (0.8 inches)
- Height: 119 mm (4.7 inches)
- Depth: 115 mm (4.5 inches)
Mass: Approximately 125 g.
Mounting: Can be mounted on a 35 mm DIN rail (EN 60715).

Contact Us

Phone: +86-15915488782
Email: uma@meloauto.com
WhatsApp: +8615915488782
Business Hours: 24/7 service
Address: Unit 601, Powerlong International Center, No. 1599 Luling Road, Siming District, Xiamen City, Fujian, China

Let us help you find the automation parts you need with reliable quality and dedicated support!