SNT401-13 | Yokogawa Optical ESB Bus Repeater Master Module

Overview

The SNT401-13 Optical ESB Bus Repeater Master Module facilitates the conversion of the ESB Bus into optical signals. It enables extended transmission distances for the ESB Bus, which connects safety control units, safety node units, and N-IO nodes. By pairing the SNT401 Master Module with the SNT501 Slave Module via an optical fiber cable, the ESB Bus range can be extended up to 5 km for single-stage configurations, or up to 10 km with two stages in specific systems.

Key Features

Function: Optical signal transport for the ESB Bus.
Connection Types:
- Star or Chain configurations supported.
Maximum Connection Stages:
- Two stages for extended distance transmission.
Transmission Distance:
- Up to 5 km for one stage.
- Up to 10 km for two stages (requires Vnet/IP system R1.03 or later).
Current Consumption:
- 0.5 A.
Weight:
- Approximately 0.3 kg.

EXTERNAL DIMENSIONS

SNT411 Optical ESB Bus Repeater Module EXTERNAL DIMENSIONS

Nominal Tolerances :

When the reference dimension is over 0.5 mm and equal or less than 120 mm, its nominal tolerance is ± 0.8 mm, while its combination of nominal tolerance is ± 1.5 mm.
When the reference dimension is over 120 mm, its nominal tolerance is in accordance with JEM 1459.

Mounting Restrictions and Cautions

Slot Configuration:
- Duplex modules must be mounted on two adjacent slots.
- Odd-numbered slots are used for ESB Bus 1 modules.
- Even-numbered slots are used for ESB Bus 2 modules.
Temperature Considerations:
- For 60–70°C operation, leave two empty slots next to the power supply module.
- Mount one set of modules in every two slots, leaving two empty slots between sets.
Compatibility with Rack Mounts:
- Use with the SNT10D Rack for installing Optical ESB Bus Repeater Modules. Refer to the manual GS 32Q06K11-31E.
System Restrictions:
- Refer to GS 32P06K60-01EN for mounting restrictions with other modules like S2SC70, SSC60, SSC50, and SNB10D.

System Requirements

SENG: Version R1.02 or later.
SCS: Version R1.02 or later.

Model Variants

Suffix Codes

-1: No explosion protection.
-3: Complies with ISA Standard G3 and supports a temperature range of -20°C to 70°C (for maintenance purposes).

Pairing Rules

When connecting via optical fiber, ensure proper pairing of master and slave modules:

Master Side → Slave Side:
- SNT401-3 → SNT501-3.
- SNT401-F → SNT501-F.
- SNT401-F → S2EN501-1.

Additional Notes

The suffix codes for bus 1 and bus 2 modules must be identical.
When connecting to an S2EN501 module, it must be installed in an S2NN30D unit.
For further details on module usage and installation, consult Yokogawa’s product manuals and guidelines.

Contact Us

Phone: +86-15915488782
Email: uma@meloauto.com
WhatsApp: +8615915488782
Business Hours: 24/7 service
Address: Unit 601, Powerlong International Center, No. 1599 Luling Road, Siming District, Xiamen City, Fujian, China

Let us help you find the automation parts you need with reliable quality and dedicated support!