V18348-10161310110 | ABB TZIDC-200 Digital Positioner

The TZIDC-200 features a compact design and modular construction, offering an excellent cost-performance ratio. Its fully automatic determination of control parameters allows for optimal adaptation to final control elements, leading to significant time savings and improved control behavior.

General Specifications

• Approvals: Worldwide approvals for Explosion Proof and Intrinsic Safety
• Vibration Immunity: Up to 10 g
• Autostroke Function: Fully automatic adaptation to valves
• Communication Protocols:
  • HART protocol standard for full access to smart functions, diagnostics, maintenance, and fault detection
  • Designed for fieldbus communication
• Compatibility: One positioner for both linear and rotary actuators

Technical Specifications

• Actuator Travel:
  • Rotation Angle: Measured range of 270° / 360°*
  • Operating Range for Linear Actuators: Min. 25°, Max. 45°
  • Operating Range for Rotary Actuators:
    • Min. 25°, Max. <270°
    • Min. 25°, Max. 350°* (see Figures 10 & 11)
• Travel Limits: Freely configurable limits from 0% to 100% of total travel (min. range > 20%)
• Travel Time Prolongation: Setting range of 0 to 200 seconds for each direction
• Dead Band Time Limit: Setting range of 0 to 200 seconds

*From HW rev.: 5.01 with order option “S1 – Contactless sensor”

Pneumatic Connections

• Cable Connections:
  • Thread ½-14 NPT
  • Thread M20 × 1.5
• Air Pipe Connections:
  • Thread ¼-18 NPT
  • Thread G ¼
  • Thread G ½
  • Optional: Cable glands and blind plugs as necessary

Compressed Air Output

• Standard Design Range: 0 to 6 bar (0 to 90 psi)
• Marine Version Range: 0 to 5.5 bar (0 to 80 psi)
• Air Capacity:

  • 5 kg/h = 3.9 Nm³/h = 2.3 scfm at 1.4 bar (20 psi) supply air pressure

  • 13 kg/h = 10 Nm³/h = 6 scfm at 6 bar (90 psi) supply air pressure

• Output Function: For single acting or double acting actuators; air vents from actuator or actuator is blocked in case of power failure
• Shut-off Values:
  • End position 0% = 0 to 45%
  • End position 100% = 55 to 100%

Instrument Air Quality

• Purity Requirements:
  • Maximum particle size: 5 μm
  • Maximum particle density: 5 mg/m³
• Oil Content: Maximum concentration of 1 mg/m³
• Pressure Dew Point: 10 K below operating temperature
• Supply Pressure:
  • Standard design: 1.4 to 6 bar (20 to 90 psi)
  • Marine version: 1.6 to 5.5 bar (23 to 80 psi)
• Air Consumption: < 0.03 kg/h / 0.015 scfm

Free of oil, water, and dust in accordance with DIN / ISO 8573-1. Pollution and oil content in accordance with Class 3.

Ordering Information

• Model: TZIDC-200 digital positioner with flameproof enclosure, intelligent, software-configurable with Local Communication Interface (LCI) and HART communication.
• Base Model: V18348-XX- X- X-X-X-X-X-X-X-X (10161310110)

Physical Characteristics

• Case / Mounting: Aluminum case, varnished, suitable for mounting to linear actuators per DIN/IEC 534 / NAMUR or to rotary actuators per VDI/VDE 3845.
• Operation: Integrated operator panel and display in the enclosure cover
• Explosion Protection: IECEx Ex d II C T4/T5/T6 Gb

Additional Options

• Output / Safe Position (Power Failure): Single acting, fail safe
• Connections:
  • Cable: Thread ½-14 NPT
  • Air Pipe: Thread ¼-18 NPT
• Feedback Modules:
  • Plug-in module for analog position feedback, signal range 4 to 20 mA (two-wire)
  • Optional Mechanical Kit for Digital Position Feedback: Not included
• Parameter Setting: Factory setting for HART devices