Yokogawa SAI143-H53/STA4D-00 Analog Input module (Current input)

Overview

The SAI143-H53/STA4D-00 is a current input module designed for ProSafe-RS systems, supporting HART communication. It features 16 isolated channels for 4 to 20 mA input signals and supports dual redundancy. Each channel includes a built-in power supply function for HART devices.

Standard Specifications

Current Input Module

This module receives 4 to 20 mA signals from the field and can be used in a dual-redundant configuration.

Item	Specifications
Model	SAI143 (*1)
Number of Input Channels	16 channels, module isolation (*5)
Rated Input Range	4 to 20 mA
Permissible Input Range	0 to 25 mA
Input Impedance (Power-ON)	250 Ω + Current value
Input Impedance (Power-OFF)	500 kΩ minimum
Rated Accuracy	SAI143-H: ±16 µA (0.05 to 23 mA) (3) (4)
Data Update Frequency	40 ms
Temperature Drift	±16 µA/10 °C
Transmitter Power Supply	16.15 V min (at 20 mA), 26.4 V max (at 0 mA), 25 mA current limit
Withstand Voltage	1.5 kV AC between input signal and system (*2)
Max. Current Consumption	5V: 320 mA, 24V: 550 mA
Weight	0.34 kg (Clamp terminal or MIL cable), 0.39 kg (Signal cable adapter)
External Connection	Pressure clamp terminal, MIL cable, Dedicated signal cable
Transmitter Power ON/OFF	Available (2-wire setting, all channels simultaneously) (*7)
PRM Support	Available (SAI143-H)

Notes:
(*1) No Zener barriers allowed; use isolation barriers in intrinsic safety systems.
(*2) 500V AC when using dedicated signal cable.
(*3) ±32 µA (for input range under 0.05 mA, Style Code S3 or later).
(*4) Accuracy for Style Code S3 or later: ±16 µA (0.05–23 mA), for S2 or earlier: ±16 µA (1–23 mA).
(*5) When operating above 60°C, channel availability may be restricted. See “ProSafe-RS Outline of I/O Modules.”
(*6) Max voltage drop in input protection: 0.45V, input impedance varies from 272.5 Ω (20 mA) to 362.5 Ω (4 mA).
(*7) Function resets alarm states in Fire & Gas devices by turning off transmitter power in 2-wire settings. (Supported in R4.03.00 and Style Code S4 or later.)

HART Communication Specifications

The SAI143-H53/STA4D-00 supports HART 5.7 protocol, allowing communication with HART 5, 6, and 7 devices. However, only one HART device can be actively communicated with at a time due to a single HART modem.

Function	Description
Communication Mode	Serial half-duplex, start-stop synchronization (1 start bit / 8 data bits / odd parity / 1 stop bit)
Applicable Standard	HART Protocol Revision 5.7 (*1)
Transmission Speed	1200 ±2 bps
Modulation	Binary phase-continuous FSK (1 = 1200 Hz ±1%, 0 = 2200 Hz ±1%)
Frame Length	5 to 267 bytes
Error Detection	Longitudinal/vertical parity
Response Time	Max. 28 characters (256.7 ms)
No Response Timer	33 characters (305 ms) for primary, 41 characters (380 ms) for secondary
Bus Monitor	8 characters (75 ms)
Response Window	20 ms

Model and Suffix Codes

Model: SAI143-H53/STA4D-00

Description: Analog Input Module (4 to 20 mA, 16 channels, module isolation)

Suffix Codes

-H: With HART communication [Release: R1.02.00] (*1)
(1: For dual-redundant pressure clamp terminal block, do not use STA4D-0 S1.)
5: For pressure clamp terminal block or MIL cable with no explosion protection
3: With ISA Standard G3 and temperature range (-20 to 70 ºC)

Option Codes

/A4D00: *With dual-redundant pressure clamp terminal block for analog (3) [Model: STA4D-00](3: For dual-redundant configuration, order an additional module with the same specifications but without option codes.)

Contact Us

Phone: +86-15915488782
Email: [email protected]
WhatsApp: +8615915488782
Business Hours: 24/7 service
Address: Unit 601, Powerlong International Center, No. 1599 Luling Road, Siming District, Xiamen City, Fujian, China

Let us help you find the automation parts you need with reliable quality and dedicated support!